Calculating fertilizer application rates accurately is essential for meeting crop nutrient requirements, improving fertilizer-use efficiency, and managing input costs. Applying too little fertilizer may limit crop growth, while excessive application can increase nutrient losses, raise production costs, and contribute to environmental problems.
For growers, agronomists, and fertilizer distributors, the key is to convert a nutrient recommendation—such as kilograms of nitrogen per hectare—into the correct quantity of a specific fertilizer product. The calculation depends on the target nutrient rate, the fertilizer grade, the field area, and the nutrients already available from the soil or other sources.
Risso provides fertilizer product information and technical specifications that can help agricultural professionals compare nutrient grades and evaluate suitable fertilizer options. Regardless of the supplier, the application rate should be calculated from verified product specifications and a crop-specific nutrient recommendation.
This guide explains the formulas, worked examples, crop-related considerations, and common mistakes involved in calculating fertilizer application rates.
1. What Determines Fertilizer Application Rates?
There is no single fertilizer application rate that works for every crop or field. Two fields growing the same crop can require different nutrient inputs because their soil fertility, previous cropping history, irrigation management, and yield potential are different.
The main factors to consider are outlined below.
Crop nutrient requirements
Different crops absorb nutrients at different rates and at different growth stages.
-
Maize (corn): Nitrogen is important for leaf development, biomass production, and grain formation. Phosphorus supports early root development, while potassium contributes to water regulation and overall plant function.
-
Wheat and rice: Nitrogen supports tillering and grain production. The timing and amount of nitrogen must be adapted to crop development and local growing conditions.
-
Vegetables: Nutrient demand varies considerably among leafy vegetables, fruiting vegetables, and root crops. Short growing cycles can make application timing particularly important.
-
Fruit trees: Nutrient requirements depend on tree age, canopy size, fruit load, soil fertility, and the stage of the production cycle.
-
Oilseed crops: Nitrogen, phosphorus, potassium, and sulfur requirements vary by species, yield target, and soil conditions.
These differences explain why fertilizer rates should be developed for the specific crop rather than copied from another production system.
Grades represent nominal nutrient percentages by weight using the conventional N–P₂O₅–K₂O labeling system. Commercial specifications vary by product and manufacturer.
Soil nutrient availability
A soil test helps establish how much phosphorus and potassium the soil can supply and whether adjustments are needed for other nutrients. For nitrogen, the assessment may also consider residual soil nitrate, previous legume crops, manure applications, and mineralization of soil organic matter.
The underlying principle is:
Fertilizer requirement = crop nutrient requirement − nutrient supply from other sources ± appropriate adjustments.
This is a planning framework rather than a universal equation for every nutrient. Actual recommendations depend on the crop, the local calibration method, and how soil test results are interpreted. Montana State University Extension describes this approach in its fertilizer rate calculation guidance
Yield target and growing conditions
A higher yield target may increase nutrient demand, but fertilizer requirements do not always increase in direct proportion to yield. Soil nutrient supply, crop response data, water availability, temperature, and other limiting factors all influence the appropriate rate.
For example, applying additional nitrogen to a drought-stressed maize crop may not produce the expected yield increase if water availability remains the main constraint.
Fertilizer formulation
Commercial fertilizers contain different concentrations of nutrients. Supplying 100 kg of nitrogen with urea requires a different product quantity from supplying the same amount with a lower-nitrogen fertilizer.
The calculation must therefore distinguish between the quantity of nutrient required and the quantity of fertilizer product needed to supply it.
2. Understand Fertilizer Grades: N-P₂O₅-K₂O
Before calculating fertilizer rates, it is essential to understand the three numbers printed on most fertilizer labels.
A fertilizer labeled 15-15-15 contains, by weight:
-
-
15% phosphate expressed as P₂O₅
-
15% potash expressed as K₂O
This does not mean the product contains 15% elemental phosphorus and 15% elemental potassium. Fertilizer labels conventionally express these two nutrients using oxide equivalents.
Example: What Is in 100 kg of 15-15-15 Fertilizer?
Nutrient composition by fertilizer label
15 kg
Nitrogen (N)
15% × 100 kg
15 kg
Phosphate (P₂O₅)
15% × 100 kg
15 kg
Potash (K₂O)
15% × 100 kg
The three nutrient values are declared on different chemical reporting bases. They should not be interpreted as 45 kg of elemental N, P, and K.
Converting P₂O₅ and K₂O into elemental nutrients
If a crop recommendation specifies elemental phosphorus or potassium rather than the conventional fertilizer-label units, convert the values before calculating the product rate.
PHOSPHORUS CONVERSION
P = P₂O₅ × 0.436
Elemental phosphorus conversion factor
POTASSIUM CONVERSION
K = K₂O × 0.830
Elemental potassium conversion factor
For practical calculations, the commonly used rounded factors are 0.44 for phosphorus and 0.83 for potassium.
For example, 60 kg of P₂O₅ corresponds to approximately 26.4 kg of elemental P, while 60 kg of K₂O corresponds to approximately 49.8 kg of elemental K.
Important: Do not convert nutrients unnecessarily. If the recommendation is already expressed as kg/ha of N, P₂O₅, and K₂O, use those same units throughout the calculation.
NITROGEN SUPPLIED BY DAP
130.4 × 0.18 =
23.5 kg N/ha
ADJUSTED UREA REQUIREMENT
(160 − 23.5) ÷ 0.46
≈ 296.7 kg/ha urea
UREA APPLICATION RATE
120 ÷ 0.46 =
260.9 kg/ha urea
UREA APPLICATION RATE
80 ÷ 0.46 =
173.9 kg/ha urea
UREA APPLICATION RATE
90 ÷ 0.46 =
195.7 kg/ha urea
20% NUTRIENT FERTILIZER
100 ÷ 0.20 =
500 kg/ha
PHOSPHATE SUPPLIED
500 × 0.20 =
100 kg P₂O₅/ha
POTASH SUPPLIED
500 × 0.20 =
100 kg K₂O/ha
UREA APPLICATION RATE
80 ÷ 0.46 =
173.9 kg/ha urea
TOTAL UREA REQUIRED
173.9 × 4 =
695.6 kg urea
FERTILIZER APPLICATION RATE
120 ÷ 0.60 =
200 kg/ha
MAP APPLICATION RATE
60 ÷ 0.52 =
115.38 kg/ha MAP
NITROGEN SUPPLIED BY MAP
115.38 × 0.11 =
12.69 kg N/ha
REMAINING NITROGEN REQUIREMENT
150 − 12.69 =
137.31 kg N/ha
ADDITIONAL UREA REQUIRED
137.31 ÷ 0.46 =
298.50 kg/ha urea
NUTRIENT CONCENTRATION
Nutrient per liter (g/L)
= Density (kg/L) × Nutrient fraction × 1,000
LIQUID FERTILIZER VOLUME
Volume (L/ha)
= Required nutrient (kg/ha) × 1,000
÷ Nutrient concentration (g/L)
UAN NITROGEN CONCENTRATION
1.32 × 0.32 =
0.4224 kg N/L
Equivalent to 422.4 g N/L
UAN APPLICATION VOLUME
100 ÷ 0.4224 =
236.7 L/ha
UREA RATE
80 ÷ 0.46 ≈
173.9 kg/ha
HECTARE TO ACRE CONVERSION
200 ÷ 2.471 ≈
80.9 kg/acre
TOTAL FERTILIZER REQUIRED
250 × 100 =
25,000 kg
Equivalent to 25 metric tons
MKP is particularly useful when the crop already receives sufficient nitrogen from other sources but still requires phosphorus and potassium. For example, in a fertigation program, the grower can adjust the P and K supply without increasing the nitrogen input.
However, MKP is not automatically the most economical phosphorus source for bulk field application. Where nitrogen and phosphorus are both required, MAP or DAP may provide a more practical nutrient combination.
For buyers evaluating water-soluble phosphate fertilizers, Risso provides a relevant reference through its
MKP 0-52-34 fertilizer product page. The actual nutrient guarantee, solubility, and impurity limits should be confirmed using the applicable product technical data sheet (TDS).
3. The Basic Fertilizer Application Rate Formula
The fundamental formula for calculating fertilizer application rates is straightforward:
FERTILIZER RATE FORMULA
Fertilizer rate (kg/ha)
=
Required nutrient rate
Nutrient fraction in fertilizer
Convert the nutrient percentage into a decimal fraction before calculating.
Where:
-
Required nutrient rate is the amount of a specific nutrient recommended per unit of land.
-
Nutrient fraction in fertilizer is the percentage shown on the label divided by 100.
-
Fertilizer rate is the amount of fertilizer product required per unit of land.
The nutrient recommendation and fertilizer grade must refer to the same nutrient form, such as N, P₂O₅, or K₂O. This calculation method is consistent with the practical guidance published by Virginia Tech and UMass Extension.
Example 1: Calculating urea requirements
Suppose a maize field requires 100 kg N/ha, and the selected urea fertilizer contains 46% N.
The nitrogen fraction is:
Suppose a maize field requires 100 kg N/ha, and the selected urea fertilizer contains 46% N.
The nitrogen fraction is:
PERCENTAGE TO DECIMAL
46 ÷ 100 = 0.46
The required urea rate is:
FERTILIZER APPLICATION RATE
100 ÷ 0.46 =
217.4 kg/ha
Therefore, approximately 217.4 kg of urea per hectare is needed to supply 100 kg N/ha.
This is the calculated quantity of fertilizer product, not necessarily the amount that should be applied in one pass. The total nitrogen recommendation may need to be divided among several applications.
Example 2: Calculating a potassium fertilizer rate
Suppose a crop requires 90 kg K₂O/ha, and the selected potassium chloride fertilizer is labeled 0-0-60.
The calculation is:
FERTILIZER APPLICATION RATE
90 ÷ 0.60 =
150 kg/ha
The required rate is 150 kg/ha of 0-0-60 fertilizer, assuming the full recommended K₂O amount is to be supplied by this product.
Example 3: Calculating the amount for an entire field
Suppose a farm has 25 hectares and the recommended application rate is 217.4 kg/ha of urea.
TOTAL FERTILIZER REQUIRED
Total fertilizer = Rate × Area
= 217.4 × 25
= 5,435 kg
5.435 metric tons
The farm therefore needs approximately 5.44 metric tons of urea for the specified application.
This calculation assumes the full 25 hectares will receive the same rate. If field zones have different soil test results or management recommendations, calculate the quantities for each zone separately.
Convert the nutrient rate into the fertilizer quantity
4. How to Calculate Rates for Different Crops
The calculation formula remains the same across crops. What changes is the nutrient recommendation used in the formula.
The figures below are illustrative calculation examples, not universal agronomic recommendations. Actual rates should be determined from locally calibrated crop guidelines, soil analysis, expected yield, and the production system.
4.1 Maize (corn)
Maize often requires substantial nitrogen, but the appropriate amount depends on yield potential, soil nitrogen supply, previous crops, manure history, and rainfall or irrigation.
Suppose a locally validated recommendation calls for the following nutrient rates:
| Nutrient |
Target rate |
Fertilizer source |
Calculated product rate |
| N |
160 kg/ha |
Urea, 46-0-0 |
347.8 kg/ha |
| P₂O₅ |
60 kg/ha |
DAP, 18-46-0 |
130.4 kg/ha |
| K₂O |
60 kg/ha |
Potassium chloride, 0-0-60 |
100 kg/ha |
The first calculation is:
UREA APPLICATION RATE
160 ÷ 0.46 = 347.8 kg/ha urea
For phosphorus:
DAP APPLICATION RATE
60 ÷ 0.46 = 130.4 kg/ha DAP
However, DAP also contains nitrogen. Applying 130.4 kg/ha of DAP supplies approximately:
NITROGEN SUPPLIED BY DAP
130.4 × 0.18 = 23.5 kg N/ha
That nitrogen must be deducted from the 160 kg/ha target before calculating the additional urea requirement:
ADJUSTED UREA REQUIREMENT
(160 − 23.5) ÷ 0.46 ≈ 296.7 kg/ha urea
The corrected fertilizer program is therefore approximately:
-
-
-
Potassium chloride: 100 kg/ha
Together, these products supply approximately 160 kg N/ha, 60 kg P₂O₅/ha, and 60 kg K₂O/ha.
In practice, nitrogen is often split between planting and later growth stages. The split should follow local maize recommendations, rainfall risk, soil texture, and the chosen application method. Avoid placing concentrated fertilizer in direct contact with seed unless the formulation and rate are specifically suitable for that placement
UAN APPLICATION VOLUME
100 ÷ 0.4224 ≈ 236.7 L/ha
UREA APPLICATION RATE
80 ÷ 0.46 ≈ 173.9 kg/ha
HECTARE TO ACRE CONVERSION
200 ÷ 2.471 ≈ 80.9 kg/acre
TOTAL FERTILIZER REQUIRED
250 × 100 = 25,000 kg
Equivalent to 25 metric tons.
4.2 Wheat
For wheat, nitrogen timing affects tiller development, canopy growth, grain number, and grain protein. Phosphorus and potassium management should reflect soil fertility and the crop rotation.
Suppose a field has an illustrative nutrient target of 120 kg N/ha and the nitrogen source is urea containing 46% N.
UREA APPLICATION RATE
120 ÷ 0.46 = 260.9 kg/ha urea
If a grower plans to supply 40 kg N/ha from urea at planting, the remaining nitrogen target is 80 kg N/ha:
UREA APPLICATION RATE
80 ÷ 0.46 = 173.9 kg/ha urea
This means the remaining 173.9 kg/ha of urea would supply the outstanding 80 kg N/ha, subject to adjustment for any other nitrogen sources.
The important operational point is that a total seasonal fertilizer rate and a single-application rate are not necessarily the same. Wheat programs should consider establishment, tillering, stem elongation, and local yield-response evidence when determining timing.
4.3 Rice
Rice fertilizer calculations must account for water management, soil characteristics, variety, planting method, and the potential for nitrogen losses.
Consider an illustrative target of 90 kg N/ha supplied entirely by urea:
UREA APPLICATION RATE
90 ÷ 0.46 = 195.7 kg/ha urea
This represents the total urea requirement if no other source contributes nitrogen.
For transplanted or direct-seeded rice, the amount applied at basal, tillering, and panicle-development stages should be based on the local nutrient management recommendation. Floodwater management, drainage, incorporation, and the timing of irrigation can affect nitrogen-use efficiency.
Do not assume that a nitrogen rate developed for irrigated lowland rice is appropriate for aerobic rice or upland rice. The production systems have different nutrient dynamics.
4.4 Vegetables
Vegetable crops differ widely in growth duration, harvest method, nutrient demand, and sensitivity to salinity or excess fertilizer.
Leafy vegetables may have a short period of rapid nitrogen demand, whereas tomatoes, peppers, and other fruiting vegetables often require nutrient supply throughout vegetative growth and fruit production.
Suppose a vegetable crop has an illustrative nitrogen target of 100 kg N/ha and a grower uses a fertilizer labeled 20-20-20.
The amount required to supply the full nitrogen target would be:
FERTILIZER APPLICATION RATE
100 ÷ 0.20 = 500 kg/ha
But this would also supply:
PHOSPHATE SUPPLIED
500 × 0.20 = 100 kg P₂O₅/ha
and
POTASH SUPPLIED
500 × 0.20 = 100 kg K₂O/ha
If the soil already has sufficient phosphorus or potassium, this application could supply more of those nutrients than the crop needs.
This is why selecting a fertilizer solely by its nitrogen concentration can be inappropriate. A grower may need separate nutrient sources or a different NPK ratio to match the crop’s nutrient requirements.
For vegetables grown under drip irrigation, calculate the seasonal nutrient requirement first, then divide the planned nutrient amount among fertigation events according to crop uptake, irrigation management, and product compatibility.
4.5 Fruit trees and orchards
Fertilizer rates for fruit trees should not be calculated simply by multiplying a generic rate per hectare by the number of trees.
Orchard nutrient requirements depend on factors such as:
-
-
-
-
-
Groundcover and nutrient competition
-
Irrigation system and root-zone distribution
Suppose an orchard’s nutrient management plan calls for 80 kg N/ha, supplied by a fertilizer containing 46% N.
UREA APPLICATION RATE
80 ÷ 0.46 = 173.9 kg/ha urea
For a 4-hectare orchard, the calculated seasonal amount is:
TOTAL UREA REQUIRED
173.9 × 4 = 695.6 kg urea
This is a hectare-based example, not a recommendation for every orchard. For high-density orchards, young trees, or localized drip fertigation, the actual plan may be expressed per tree, per irrigation zone, or per production block.
When converting from a per-hectare recommendation to a per-tree rate, use the actual planted area and tree population. Do not apply the full hectare-based rate to every tree.
4.6 Potatoes and other root or tuber crops
Potatoes require careful nutrient management because excessive nitrogen can favor vegetative growth and delay tuber maturity, while insufficient potassium can limit yield and tuber quality.
Suppose a soil-test-based recommendation calls for 120 kg K₂O/ha, supplied by potassium chloride labeled 0-0-60.
tion for every orchard. For high-density orchards, young trees, or localized drip fertigation, the actual plan may be expressed per tree, per irrigation zone, or per production block.
When converting from a per-hectare recommendation to a per-tree rate, use the actual planted area and tree population. Do not apply the full hectare-based rate to every tree.
FERTILIZER APPLICATION RATE
120 ÷ 0.60 = 200 kg/ha
The calculated requirement is 200 kg/ha of this fertilizer if the full K₂O target is supplied by potassium chloride.
The final program should still account for soil potassium, chloride sensitivity, irrigation-water quality, and the timing of application. Where chloride is a concern, another potassium source may be more suitable, depending on cost, soil conditions, and the crop’s requirements.
Comparing crop calculations
| Crop |
Illustrative nutrient target |
Fertilizer grade |
Product rate |
| Maize |
160 kg N/ha |
Urea, 46% N |
347.8 kg/ha before accounting for other N sources |
| Wheat |
120 kg N/ha |
Urea, 46% N |
260.9 kg/ha |
| Rice |
90 kg N/ha |
Urea, 46% N |
195.7 kg/ha |
| Vegetables |
100 kg N/ha |
20-20-20 |
500 kg/ha, also supplying 100 kg/ha each of P₂O₅ and K₂O |
| Fruit orchard |
80 kg N/ha |
Urea, 46% N |
173.9 kg/ha |
| Potatoes |
120 kg K₂O/ha |
Potassium chloride, 60% K₂O |
200 kg/ha |
These examples demonstrate the calculation process only. They should not be used as a substitute for locally appropriate nutrient recommendations.
5. How to Calculate Fertilizer Blends
In commercial crop production, a single fertilizer rarely supplies every required nutrient in exactly the right proportions. Farmers often combine two or more fertilizers to achieve the target N-P₂O₅-K₂O rates.
The critical rule is to account for nutrients contributed by every fertilizer in the blend, including nitrogen contained in DAP or MAP and potassium supplied by potassium nitrate.
Worked example: Urea + MAP + potassium chloride
Suppose the target application is:
-
-
Phosphorus: 60 kg P₂O₅/ha
-
The selected fertilizer products are:
| Fertilizer |
Grade |
Primary role |
| Urea |
46-0-0 |
Nitrogen |
| MAP |
11-52-0 |
Nitrogen and phosphorus |
| Potassium chloride |
0-0-60 |
Potassium |
Step 1: Calculate the MAP requirement.
MAP APPLICATION RATE
60 ÷ 0.52 = 115.38 kg/ha MAP
Step 2: Calculate the nitrogen supplied by MAP.
NITROGEN SUPPLIED BY MAP
115.38 × 0.11 = 12.69 kg N/ha
Step 3: Calculate the remaining nitrogen requirement.
REMAINING NITROGEN REQUIREMENT
150 − 12.69 = 137.31 kg N/ha
Step 4: Calculate the urea requirement.
ADDITIONAL UREA REQUIRED
137.31 ÷ 0.46 ≈ 298.50 kg/ha urea
Step 5: Calculate the potassium chloride requirement.
FERTILIZER APPLICATION RATE
80 ÷ 0.60 =
133.33 kg/ha
The resulting fertilizer program is approximately:
| Product |
Rate (kg/ha) |
| MAP, 11-52-0 |
115.38 |
| Urea, 46-0-0 |
298.50 |
| Potassium chloride, 0-0-60 |
133.33 |
| Total product |
547.21 |
This blend supplies approximately 150 kg N/ha, 60 kg P₂O₅/ha, and 80 kg K₂O/ha, before accounting for other nutrient sources or application losses.
The method follows the nutrient-accounting approach outlined in Montana State University Extension’s fertilizer recommendation guidance
What if the fertilizer ratio does not match the crop's requirements?
A fertilizer such as 15-15-15 is convenient when the target nutrient proportions are reasonably aligned with the product grade. However, if the soil already contains sufficient phosphorus and potassium, using an NPK blend to meet the nitrogen target may introduce unnecessary amounts of the other nutrients.
The practical solution is to calculate each nutrient separately, compare the results with the available fertilizer grades, and determine whether a combination of straight fertilizers or a custom blend would be more appropriate.
6. Calculating Liquid Fertilizer Application Rates
Liquid fertilizer calculations require an additional step because the nutrient concentration may be expressed by weight, while application equipment measures volume.
For a liquid fertilizer labeled with a weight-based nutrient percentage, the calculation requires the product’s density.
Formula for liquid fertilizer
NUTRIENT CONCENTRATION
Nutrient (g/L) = Density (kg/L) × Nutrient fraction × 1,000
The result is in grams of nutrient per liter.
The required volume is:
LIQUID FERTILIZER VOLUME
Volume (L/ha) = Required nutrient (kg/ha) × 1,000 ÷ Nutrient concentration (g/L)
Example: Liquid nitrogen fertilizer
Assume a liquid nitrogen fertilizer has the following properties:
-
Nitrogen concentration: 32% by weight
-
-
Target application: 100 kg N/ha
First, calculate the nitrogen content per liter:
UAN NITROGEN CONCENTRATION
1.32 × 0.32 = 0.4224 kg N/L
Equivalent to 422.4 g N/L.
The product supplies 0.4224 kg N per liter, or 422.4 g N/L.
Next, calculate the application volume:
UAN APPLICATION VOLUME
100 ÷ 0.4224 ≈ 236.7 L/ha
The calculated rate is approximately 237 L/ha.
This result depends on the assumed density and concentration. Use the actual product specifications and, where relevant, the density at the applicable temperature. Virginia Tech Extension provides additional guidance on calculating liquid fertilizer quantities from density and nutrient analysis.
For fertigation systems, distinguish between the fertilizer quantity applied per hectare and the concentration in the irrigation water. The latter also depends on irrigation volume and the area being irrigated.
7. How to Adjust Rates for Soil Conditions and Nutrient Efficiency
The basic calculation determines how much product is required to deliver a target nutrient amount. It does not, by itself, establish whether that target is agronomically correct.
Several adjustments may be necessary before the fertilizer rate is finalized.
Soil testing and residual nutrients
Soil test results are particularly important for phosphorus and potassium. If soil nutrient levels are already high, additional applications may be unnecessary. If levels are low, corrective applications may be needed according to local soil test calibration.
For nitrogen, assess residual nitrate, previous legume crops, manure, and other relevant nitrogen credits. Avoid deducting an assumed soil nutrient quantity unless the recommendation method supports that adjustment.
Nutrient-use efficiency
Not all nutrients applied to a field are recovered by the crop during the growing season. Losses and reduced availability can occur through leaching, volatilization, denitrification, runoff, immobilization, and other soil processes.
However, a fertilizer rate should not automatically be increased by dividing the target by an arbitrary efficiency percentage. Some agronomic recommendations already account for typical losses and crop response. Additional adjustments should follow locally validated guidance.
7.3 Can MKP, MAP, and DAP be mixed with calcium nitrate?
Concentrated phosphate fertilizers should generally be kept separate from calcium nitrate in stock tanks unless compatibility has been established for the exact formulation.
Calcium can react with phosphate to form poorly soluble calcium phosphate, potentially causing sediment and blocked irrigation emitters.
In a conventional A/B tank system, calcium nitrate is normally stored in one tank and phosphate fertilizers such as MKP or MAP in the other. The solutions are diluted separately before entering the irrigation system.
A jar test using the actual water source, fertilizer grades, and intended concentrations can help identify visible precipitation. However, it does not replace a full compatibility assessment, particularly for complex nutrient solutions.
7.4 Foliar application
MKP is commonly used in foliar programs requiring additional phosphorus and potassium. Water-soluble MAP may also be suitable for selected foliar formulations.
Application concentration, crop sensitivity, temperature, water quality, and manufacturer instructions all affect the risk of leaf injury. A product suitable for soil application is not automatically suitable for foliar spraying.
8. Cost per Unit of Nutrient
Comparing fertilizer prices by tonne alone can lead to misleading purchasing decisions because MKP, MAP, and DAP supply different nutrient combinations.
A useful starting point is to calculate the cost per kilogram of P₂O₅:
Cost per kg P2O5
=
Price per kg of fertilizer
P2O5 fraction
For example, assuming all products cost \$500 per tonne:
| Fertilizer |
P₂O₅ content |
Illustrative cost per kg P₂O₅ |
| MKP 0-52-34 |
52% |
$0.96 |
| MAP 11-52-0 |
52% |
$0.96 |
| MAP 12-61-0 |
61% |
$0.82 |
| DAP 18-46-0 |
46% |
$1.09 |
Illustrative calculations only, not current market quotations. Actual prices, product purity, freight, duties, and handling costs are excluded.
This calculation compares phosphate cost but does not account for the value of other nutrients. MKP supplies potassium, while MAP and DAP supply nitrogen. The full cost comparison should include any additional fertilizer required to meet the crop’s remaining nutrient requirements.
For commercial procurement, buyers should also evaluate:
-
Guaranteed nutrient analysis.
-
Product grade and intended application.
-
Solubility and insoluble matter for solution-based applications.
-
Moisture, particle size, and handling characteristics where relevant.
-
Packaging, shipment terms, and total delivered cost.
-
Current TDS and batch-specific certificate of analysis (COA).
A fertilizer with a lower price per tonne is not necessarily the most economical choice if its nutrient profile does not match the crop’s requirements or if its physical properties create application problems.
Frequently Asked Questions (FAQs)
Conclusion
MKP, MAP, and DAP are important phosphate fertilizers, but their nutrient compositions and application characteristics make them suitable for different fertilizer programs.
-
MKP 0-52-34: A nitrogen-free source of phosphorus and potassium, widely used in fertigation, hydroponics, foliar nutrition, and water-soluble fertilizer production.
-
MAP 11-52-0 or 12-61-0: A source of ammonium nitrogen and phosphorus, available in granular and water-soluble grades for different applications.
-
DAP 18-46-0: A concentrated granular source of nitrogen and phosphorus, commonly used for pre-plant fertilization, soil application, and dry fertilizer blending.
The best fertilizer is the one that meets the crop’s nutrient requirements, fits the application system, and provides an appropriate balance between nutrient efficiency and total cost.
For buyers comparing phosphate fertilizer suppliers, Risso offers a starting point for evaluating fertilizer grades and product specifications, including its
MKP 0-52-34 fertilizer. Confirm the applicable technical data sheet, nutrient guarantee, and product suitability before placing an order.
Choosing the right fertilizer is ultimately a matter of matching nutrient composition, product quality, and application method—not simply selecting the grade with the highest phosphate percentage.
Fertilizer Related Products
If you want to know other questions about Calcium Nitrate or NPK fertilizers , please contact us and we will provide professional answers.
What will you get when touch？
✔ Quick & helpful reply within 6 hours.
✔ Tailored solutions for your project.
✔ One-stop product, tech, market
